special audiophile high density kiln fired red terracotta compression driver support unit
Date: 04/03/2013
Views: 4092
1M-LTH142-smoothed-20-with-and-without-eq
LTH142 plus HF144 measured at 1M, with smoothing 20 per octave.
With and without MiniDSP EQ applied.
Crossing over at 500Hz, with LR24,
note that room effects take over considerably under 700hz.
Date: 04/03/2013
Views: 2795
1M-smoothed-20-with-and-without-LTH142-no-eq
LTH142 plus HF144 measured at 1M, with smoothing 20 per octave.
One measurement is with the LTH142 horn removed, i.e. the compression driver sitting naked on the edge of the speaker box.
Crossing over at 500Hz, with LR24,
note that...
Date: 04/03/2013
Views: 2594
1M-LTH142-andPH916-smoothed-20-no-eq
LTH142 plus HF144, and Pyle PH916 plus HF144.
Measured at 1M, with smoothing 20 per octave.
No EQ applied.
Crossing over at 500Hz, with LR24,
note that room effects take over considerably under 700hz
Date: 04/03/2013
Views: 2126
1M-PH916-smoothed-20-with-and-without-eq
Pyle PH916 plus HF144.
Measured at 1M, with smoothing 20 per octave.
No EQ applied, and with some EQ applied to smooth the response and compensate for HF dropoff.
Crossing over at 500Hz, with LR24,
note that ...
Date: 04/03/2013
Views: 2632
1M-LTH142-andPH916-smoothed-20-with-eq
Pyle PH916 plus HF144, and Faital LTH142 plus HF144
Measured at 1M, with smoothing 20 per octave.
Both with with some EQ applied to smooth the response and compensate for HF dropoff, so that the FR for each is approximatly the ...
Date: 04/03/2013
Views: 2247
1M-PH916-gated-with-EQ
Pyle PH916 plus HF144, only.
Measured at 1M, but this time leaving the homilmpulse autogating in place, so the high frequency region is unsmoothed, and it is smoothed flat below 700hz where room effects kick in.
Crossing...
Date: 04/03/2013
Views: 2166
miniDSP-PylePH916-eq-try1
EQ curve used to flatten out the LF144 with the Pyle PH916 with MiniDSP..
this is just the first try, I'm sure it could be refined.
Note crossover is @ 500Hz with LR24 slope. May not be effective as the PH916 is only rated to 1000hz, but...
